Medical Care - Vicorv Technology

Medical Care

Application

Medical Care

Biomedical Signal Monitoring: can be used to monitor biomedical signals, such as electrocardiograms (ECG) and electroencephalograms (EEG), to record and analyze cardiac and brain activity to help doctors make disease diagnoses and treatment decisions.
Infusion Pumps and Blood Transfusion Devices: Used to monitor the flow and velocity of fluids in infusion pumps and blood transfusion devices to ensure accurate delivery of medications and blood transfusions and to improve treatment efficacy and safety.
Ventilator and Oxygen Supply Equipment: can be used to monitor gas flow rates in ventilators and oxygen supply equipment to ensure that the patient’s respiratory support and oxygen supply are in line with the physician’s settings and needs.
Signs monitoring equipment: It is used to monitor the patient’s body temperature, blood pressure, oxygen saturation and other physiological indicators, providing real-time monitoring data for medical staff to make timely diagnosis and treatment.
Electrical stimulation and neuromodulation: Current sensor chips are used in electrical stimulation and neuromodulation devices to monitor and control current output, such as in deep brain stimulation therapy for treating neurological disorders such as Parkinson’s disease.
Pain point localization and therapy: Used in physical therapy devices to localize and monitor pain points, e.g., in transcutaneous electrical stimulation therapy to relieve pain and promote rehabilitation.
Muscle movement monitoring: used to monitor muscle movement and EMG signals for rehabilitation and assessment of motor function.

Application Characteristics

Non-invasive measurement: the current sensor chip enables non-invasive current measurement without direct contact with the patient's body, reducing the risk of cross-infection and providing a more comfortable and safer measurement method.

High accuracy: The current sensor chip has high accuracy and sensitivity, and can accurately measure weak current signals to ensure the accuracy and reliability of medical devices in the monitoring and treatment process.

Miniaturized design: Current sensor chips can realize miniaturized design, applicable to a variety of portable and embedded medical devices, which improves the portability and carryability of the equipment, and is convenient for patients to use and carry.

Energy-saving and efficient: Current sensor chips are usually designed with low power consumption, which helps to extend the service life of the device and reduce energy consumption, improving the efficiency and sustainability of medical devices.

Good safety performance: current sensor chips usually have better isolation and anti-interference ability, to protect the safety of medical equipment and patients, to prevent current interference and external interference on the normal operation of the equipment and patient health.

Application Cases

Photovoltaic Solar Panel

Learn More

Vehicle Charging System

Learn More

Energy Storage Station

Learn More

Photovoltaic Charging Equipment

Learn More

Motor Controlled Robot

Learn More

X Ray Machine Monitoring

Learn More

Solar Tracking System

Learn More

Energy Storage Battery

Learn More

Related Products

SC780

The SC780 current sensor enables current conductor impedance as low as 0.08mΩ in the semiconductor sealing process, making it suitable for use in power systems that require continuous operation in measuring up to 200A, with the integration of low impedance side conductors, low hysteresis cores and self-developed linear Hall IC.

Learn More

SC813

The SC813 is a member of Hall current sensor product series. Its differential output mode is convenient for later application, and its ultra-wide dynamic detection ability supports customers to detect the measured current range as low as 1A and as high as 50A. It meets the requirements of users to realize the detection of load current under the condition of insulation and isolation, and is suitable to replace other passive or discrete sensor detection schemes such as power resistor, linear optocoupler and transformer.

Learn More

SC840

Vicorv 's SC840 series is an isolated current detection chip that uses the principle of open-loop Hall sensor detection.The industry's first fully integrated current detection chip that can pass 20kA/8us lightning surge test. This product with the world's first packaging technology, in 10mm*11mm*2.3mm wide-body SOP16 encapsulation on realized as low as 0.2 m Ω current lead impedance,this enables it to be applied to power systems requiring continuous operation at measurements up to 100A.

Learn More

HK510

HK510 is a highly sensitive unipolar Hall switch chip designed based on BCDMOS technology. The chip includes temperature compensation, comparator, and output driver. In addition, mechanical stress has little effect on the magnetic parameters of the chip.

Learn More

HK421

HK421 is a unipolar Hall switch chip with high voltage resistance and high sensitivity, which is designed by bipolar semiconductor technology. The chip is composed of voltage stabilizing unit, Hall voltage generator, differential amplifier circuit, temperature compensation circuit and Open collector output circuit. Working mode: input Magnetic flux density and output digital voltage signal. Provide TO92S inline packaging, SMT SOT23-3L packaging, and all packaging meets RoHS standards.

Learn More

SC810

The VICORV SC810 provides economical and precise solution for differential output mode in industrial, commercial, and communications systems. The superior features of high-sensitivity and wide-dynamic-range bring extra-experience to our customers. Fully integrated SOP-8 package is ideal for space-constrained applications as motor control, load detection and power supplies.

Learn More

+86 139-2388-4697

Current Sensor

Hall Sensor

Industry Applications

Technical Support

About Vicorv